* Please read. Some will disagree and say it won’t work, but grease, new clips, and pads didn’t. So I did it my way. This happened on my earlier Windstar too,but on the front brakes. I never expected the rear ones to do it on my Chrysler, but I also used Goop on that one years ago and it fixed it too.. If it sounds stupid but it works, it ain’t stupid. The Goop layer is paper thin and can peel off, so all the horror stories you may think of are not true, as this has worked fine all summer and still is. I actually did it and proved it to myself, not just thought about it. I did not glue the clips in, only “tacked” them. The next time they come out, I will just pull the clips right out too and put in new ones. After putting on the Goop, pressing the breaks puts tremendous pressure on the glue and it spreads out perfectly even and will NOT cause pads to wear uneven. You see the Rattles were finally found and fixed, thanks to Amazing Goop. The pads were the farthest from my mind that I would have thought of causing the rattle and the Slightest bumps (at any speed) caused rattles that sounded like something was really LOOSE! Finally I tracked them down and here is how I fixed them!
Since then, there have been no rattles all summer long, so it is still working just fine and sounds like new again. This video may also provide some helpful tips if you simply want to change your own brake pads or rotors to save some money and see how to do it. And those of you with experience with Amazing Goop, you know this will work,but you do not have to do it. This was how I totally fixed my Rattle problem. Thanks for watching and subscribing.
Dave Herbert
AMA L-8221
CD/LM/Scientific
Academy of Model Aeronautics.
 in 2010 Chrysler T&C Van.){kind=link}