This floodlight is different from the earlier ones in that it is based on a single flatter housing with both the LED and the ballast mounted in the same space. …
This is a look inside a typical 10W LED floodlight. These lights tend to have a back and front assembly. The back assembly is where the electronic driver (ballast) is …
The main feature of this light is that it is very slim and light. It’s basically just two pieces of pressed and punched aluminium forming a strangely lightweight floodlight panel. …
New toy! A generic ebay Lux meter from China for testing light levels. I decided to test the two 20W LED floodlights above my bench by seeking their peak output …
I bought this 12V 10W LED floodlight to see if it used a current regulator or just a simple resistor. It turned out to use a current regulator based on …
You can now buy me cake and things to take apart at:- If you’ve bought or are considering buying an LED floodlight from ebay, then this video will show you …
I bought these floodlights to examine because one has a very narrow beam angle (30 degree) and both had what appeared to be an extra heatsink on the back. They …
I bought this on ebay while purchasing other items from the same supplier, and wondered how they could sell and ship a 10W LED floodlight for about £5 ($8). Here’s …
It was inevitable that I’d buy one of these units, and having seen inside one on an Electronupdate teardown video I had plans to hack the PCB that I expected …