PROPER Honey Bee CP2 SETUP & HOW to fly it.04:33

  • 0
Published on September 10, 2017

Click this to go to Xheli.com for latest prices. If you sign up for their xhelicopter newsletter, you will get discount coupons. Transmitter switches and servo wires should be set up this way.

Servo switches from L to R.
Ail Down, El Up, Th down, Rudder Up.
Servos plug into the TX like this.

Front-Ch 2, (2nd from top)
Right rear, Ch 1 (top)
Left Rear, Ch 6, just above the bottom (batt)
Black wires are closest to the edge of the Rx.

(Collective Pitch) helis are quite a handful. Fly a good sim 1st, like Real Flight or Aerofly Pro Deluxe.

They’re just like the real thing. If you cant fly the Sim, then forget the model unless you have lots of $ for parts, time and patience.

Then Memorize my 9 helicopter tips, and don’t deviate from them. It also helps to have some coordination too, because you have to move both sticks in all directions ALL the time! There is never a dead moment!
Then watch this video and make sure your heli looks and sounds like this.
Good luck,
Dave

Enjoyed this video?
"No Thanks. Please Close This Box!"