CHECK OUT AZZA FLYING HIS VIKING SOLO HERE –
FINALY WAS GOOD TO GET THESE TWO VIKINGS UP TOGETHER, THIS WAS SONNYS SECOND FLIGHT ON HIS VIKING WITH A BRAND NEW DA 120cc PETROL / GAS ENGINE, (HAD BEEN RAN UP ON GROUND SEVERAL TIMES BEFORE FLYING).
AZZA FLEW HIS VIKING POWERED BY A DLE 120cc PETROL / GAS ENGINE,
AZZAS SET UP IS –
FLYING HER ON THE NEW SPEKTRUM DX 20 TRANSMITTER,
SPEKTRUM 6280 HV SERVOS ON THE ELEVATOR & RUDDER,
SPEKTRUM 6290 HV SERVOS ON AILERONS,
SPEKTRUM 6150 HV SERVOS ON THE THROTTLE & CHOKE,
ALSO USING THE AR 9350 RECEIVER WITH BUILT IN GYRO,
CHECK OUT THE HORIZON WEBBSITE ON THE VIKING HERE –
HAN1065 Model 12 Viking 120cc ARF £1399.99 (RRP)
Scandinavian Airshow is a professional team with over 30 years of airshow experience. In 2013, they unleashed one of the most powerful aerobatic biplanes ever conceived – the Model 12 Viking. Designed by Kevin Kimball, built by Jim Kimball Enterprises and flown by Jacob Hollander, it has wowed millions all over the world. Everything about it, right down to the custom trim scheme by Mirco Pecorari of Aircraft Studio Design, is without equal.
This giant-scale Hangar 9 replica is every bit the stunner its full-scale inspiration is. Matched with any of the most popular 100-125cc Petrol engines, it will perform show-stopping 3D manoeuvres with competition-level precision. And its fit and finish is every bit as good as anything an expert modeller could build from scratch.
Lightweight, Laser-Cut Balsa/Ply Construction
The model has been expertly built to exacting standards with the finest balsa and plywood available. The result is an ARF model that goes together easily and flies with laser-true precision.
Painted Aluminium Landing Gear with Fibreglass Cowl and Wheel Pants
As with the airframe, the landing gear, split cowl and wheel pants are made from the best materials available. And all are painted to perfectly match the vibrant UltraCote® film trim scheme.
Carbon-Fibre Wing Tubes and Tail Wheel Bracket
Both the upper and lower wings benefit from the strength of carbon fibre wing tubes that can easily withstand the stress of aggressive 3D aerobatics. The tail wheel bracket is also reinforced with carbon fibre for extra durability without extra weight.
Firewall Pre-Drilled for Popular 100-125cc Petrol Engines
The bolt pattern drilled into the firewall makes it easy to mount any of the most popular 100-125cc engines
Wingspan:
2.26 m (89.2 in)
Length:
2.21 m (87.0 in)
Wing Area:
161 sq dm (2490 sq in)
Flying Weight:
12-13 kg (26-28 lb)
Engine Size:
100-125cc (Sold Separately)
Required Receiver:
9+ Channel (Sold Separately)
Required Radio:
9+ Channel (Sold Separately)
Experience Level:
Advanced
Recommended Environment:
Outdoor
Assembly Required:
Yes
Assembly Time:
20+ Hours
PLEASE LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR CHANNEL TBOBBORAP1 AND FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR HD QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT –
FILMED ON 12-3-2017,
