CHECK OUT OUR PLAYLIST OF FOUR VIDEOS OF THIS AWESOME MODEL FLYING –
STEVE HOLLAND DESIGNED AND BUILT THIS PLANE SEVERAL YEARS AGO,
STEVE SENT THIS INFO OVER –
Aerokot….4m span, 30kg weight. All balsa and ply with Pro-film covering (15m+) and a home made U/C from bits left around the workshop welded together. It was designed on Autocad and then printed onto paper and then the paper stuck to the wood. The whole process is much simpler now as I have my own laser cutter. The radio is Futaba split down the middle with 20kg servos x 6 on the main controls and the rudder servo is from a certain Reliant Robin! The nose comes of with all the plumbing and pipes inside it and each wing is joined in the centre. The tail surfaces also come off to help pack it in the van alongside the Lancaster and five other models.
(THE ROBIN RELIANT IS FROM THE TOP GEAR SPECIAL SHUTTLE LAUNCH THAT STEVE PILOTED)
STEVES PARTNER SHARON SENT THIS INFO OVER –
Aerokot – 66% scale
Designed, built and flown by Steve Holland
Wingspan: 4 metres
Weight: 30.5 kg
Power: DA150
11 servos
3 receivers
7 battery packs
This is a model of a unique Icelandic homebuilt biplane designed and flown by Hunn Sneadel, former Icelandic aerobatic champion. It was based on the Jungmeister but is slightly smaller. The Idelandic word “kot” means “coat” and it’s called an Aerokot because Hunn says the plane fits him like a coat.
Steve designed the model from the original plan that was given to him by Hunn.
The wheels are from a downhill skateboard. It’s covered in yellow Profilm – about 25 metres of it.
PLEASE LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR CHANNEL TBOBBORAP1 AND FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR HD QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT –
FILMED AT THE HEADCORN SOUTHERN RC MODEL AIRCRAFT SHOW AT HEADCORN AERODROME NEAR HEADCORN IN KENT,
TN27 9HX,
FILMED OVER THE WEEKEND 9/10-9-2016,
