Shaft rotation limiter 3
The driving grey pulley transmits rotation to the blue shaft through a friction clutch. The shaft can rotates only around 3 turns because the immobile orange pin allows the green …
0
Tag: Rotation
Shaft rotation limiter 4
The driving grey pulley transmits rotation to the blue shaft through a friction clutch. Tooth number of the blue gear Z1 = 30. Tooth number of the green gear Z2 …
0
Numerical Simulation of Nix’s Rotation
This is a numerical simulation of the orientation of Nix as seen from the center of the Pluto system. It has been sped up so that one orbit of Nix …
0
Mechanism for converting continuous rotation into 90 deg. oscillation to both sides with dwells 1
Input: green cam. A coulisse mechanism is used to enlarge oscillation of the pink follower (from 20 deg. to 180 deg.). Output motion of blue lever: Neutral rest – Turn …
0
#51 – Question/Answer: Fan Airflow Direction and Rotation
Q. What are those arrows on the side of computer fans? A. One is the fan’s direction of airflow the other is the rotation direction. Watch video to find out …
0
Linear reciprocation with one way interrupted 180 deg. rotation 3
Input: pink slider linearly reciprocating. Output: grey shaft. When the shaft moves to the right, it rotates 180 deg. at the end of its stroke thanks to the gear-rack drive. …
0
Converting two-way linear motion into one way rotation 7
Input: blue slider (a linear cam) reciprocating. Output: grey shaft rotating continuously. To ease the output rotation the cam slanting angle must not large (20 deg. in this video).
0
Linear reciprocation with one way interrupted 180 deg. rotation 1
Input: blue slider linearly reciprocating. Output: green shaft. When the slider moves up, at upper end of its stroke the shaft rotates 180 deg. thanks to gear-rack drive and then …
0
Linear reciprocation with one way interrupted 180 deg. rotation 2
Input: glass slider linearly reciprocating. Output: blue shaft. When the shaft moves to the right, it rotates 180 deg. at the center of its stroke thanks to the cam mechanism. …
0
Hinge enabling 360 deg. rotation 1
Ordinary hinges can not rotate 360 degrees because of thickness of moving and grounded parts. This proposed design does not have such limitation. A satellite gear drive is applied here …
0