Soda Can Crush and De-Crush Trick

Published on August 29, 2017

A suggestion by viewer 19Tranc3r92.

This is how we did this:

We poked a tiny hole in the bottom of the can and emptied the soda. We put a small amount of water in the can. We heated the can with a torch to boil the water and put a piece of tape over our hole in the can to seal it. As the steam cooled, it collapsed (around 1600 times its volume) and the can crushed under the vacuum. This took quite a bit of time and we had to compress the video to speed it up. Dipping the can in water would have greatly increased the condensing-rate of the steam, but because it was just air-cooling it look longer.
Then we re-heated the can to bring it back to an almost-normal shape.


Music is by Zero-Project
“Distorted Reality”

Tags:,
Enjoyed this video?
"No Thanks. Please Close This Box!"