Nuclear Weapons & War, Atomic Reactors & Radiation playlist:
more at
Describes the ongoing construction of the Shippingport Atomic Power Station. Part of a series of films telling folks how gosh golly happy fun it will be having a nuclear reactor in your back yard.
Originally a public domain film from the US National Archives, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
Wikipedia license:
The Shippingport Atomic Power Station was (according to the US Nuclear Regulatory Commission) the world’s first full-scale atomic electric power plant devoted exclusively to peacetime uses. It was located near the present-day Beaver Valley Nuclear Generating Station on the Ohio River in Beaver County, Pennsylvania, United States, about 25 miles (40 km) from Pittsburgh.
The reactor reached criticality on December 2, 1957, and aside from stoppages for three core changes, it remained in operation until October 1982. The first electrical power was produced on December 18, 1957 as engineers synchronized the plant with the distribution grid of Duquesne Light Company.
The first core used at Shippingport originated from a cancelled nuclear-powered aircraft carrier and used highly enriched uranium (93% U-235) as “seed” fuel surrounded by a “blanket” of natural U-238, in a so-called seed-and-blanket design; in the first reactor about half the power came from the seed. The first Shippingport core reactor turned out capable of an output of 60 MWe one month after its launch. The second core was similarly designed but more powerful, having a larger seed. The highly energetic seed required more refueling cycles than the blanket in these first two cores.
The third and final core used at Shippingport was an experimental, light water moderated, thermal breeder reactor. It kept the same seed-and-blanket design, but the seed was now Uranium-233 and the blanket was made of Thorium. Additionally, being a breeder reactor, it had ability to transmute relatively inexpensive Thorium to Uranium-233 as part of its fuel cycle. The breeding ratio attained by Shippingport’s third core was 1.01. Over its 25-year life, the Shippingport power plant operated for about 80,324 hours, producing about 7.4 billion kilowatt-hours of electricity.
Owing to the aforementioned peculiarities, some non-governmental sources label Shippingport a “demonstration PWR reactor” and consider that the “first fully commercial PWR” in the US was Yankee Rowe. Criticism centers on the fact that the Shippingport plant had not been built to commercial specifications. Consequently, the construction cost per kilowatt at Shippingport was about ten times those for a conventional power plant…
…The world’s first commercial nuclear power station, Calder Hall at Windscale, England, was opened in 1956 with an initial capacity of 50 MW (later 200 MW).[36][42] The first commercial nuclear generator to become operational in the United States was the Shippingport Reactor (Pennsylvania, December 1957)…
…The SM-1 Nuclear Power Plant, at Fort Belvoir, Virginia, was the first power reactor in the U.S. to supply electrical energy to a commercial grid (VEPCO), in April 1957, before Shippingport. The SL-1 was a U.S. Army experimental nuclear power reactor at the National Reactor Testing Station in eastern Idaho. It underwent a steam explosion and meltdown in January 1961, which killed its three operators…
